Handmade Kwanzaa Minibook

  • Difficulty Rating: Beginner
Handmade Kwanzaa Minibook

With a few Fiskars tools, some vivid fabrics, some fusible web, and a little bit of stitching, you're on your way to creating a colorful textile cover that will transform a standard minibook into a beautiful record of your family's Kwanzaa celebration.

kwanzaa minibook cover

Measure the height and width of the cover of your minibook and add 3/4 inch to each side. Cut 2 pieces of fabric to this size. With the fabric pieces right sides together, sew a 1/2 inch seam along the top, right side, and bottom of the cover, backstitching at the starting and stopping points. Trim the corners to reduce bulk. Fold the seams open and back so they lie against the cover and iron them flat.

Fold back the edges of the open side of the cover 3/4 inch and iron.

kwanzaa minibook batting

Turn the cover right side out and slip in a piece of quilt batting cut to the minibook cover size. Slide the fabric cover over the minibook cover to check the size. If it is too loose, remove the batting, turn the fabric cover inside out, and stitch slightly inside the previous seam allowance to make the opening narrower. Also adjust the pressed hems on the open side of the fabric cover if needed.

Leave the fabric cover removed from the book.

kwanzaa minibook appliques

Cut pieces of brown felt in the shapes shown to create the kinara. The shape shown in the center can be easily created by cutting a rectangle, marking the center point of the bottom edge, and angling a cut from the top corners down to the marked midpoint. Brown fabric can be used in lieu of felt.

kwanzaa minibook hand stitching

Hand stitch the pieces of the kinara to the lower portion of the fabric cover.

kwanzaa minibook appliques 2

Following the package instructions, iron fusible web onto the back side of red, green, and black, and 2 different yellow fabrics. Using the Cupcakes and More Shape Template, trace candles onto the paper backing of the fusible web. Trace the flames onto one of the yellow fabrics. Using the Circles Shape Template, trace a circle onto the other yellow fabric. Cut out all of the pieces.

kwanzaa minibook appliques 3

Iron all of the appliques to the cover as shown. Handstitch around the candle glow circle and add wicks to each of the candles if desired. Slip the completed fabric cover over the minibook cover.

kwanzaa minibook border punch

Cut 3 red, 3 green, and 1 black 1 1/2 inch strips from cardstock. The strips should be cut to the same height as the pages of the minibook. Use the Diamond Edge Border Punch on one edge of each strip. Back the strips with yellow cardstock and, after dividing the book pages into 7 equal sections, adhere the colored strips to the right-hand edge of the minibook pages with the black strip being first, then the red strips, and ending with the green strips.

kwanzaa minibook stamping

Using the Alpha Basic Stamp set and black ink, stamp fabric pieces with each of the 7 principles of Kwanzaa: Umoja, Kujichagulia, Ujima, Ujamaa, Nia, Kuumba, and Imani.

kwanzaa minibook inside

Adhere the fabric strips to the top of minibook pages.

Supply List

Minibook; fabric scraps; fusible web; thread; embroidery floss (optional); red, yellow, green, and black cardstock.