Ceramic Christmas Coasters

  • Difficulty Rating: Beginner
Ceramic Christmas Coasters

Thinking about what might make a nice gift for my children’s teachers this Christmas, I hit upon the idea to present them with a set of unique, handmade seasonal coasters.

Fiskars has a huge assortment of holiday themed stamps and I was inspired to have a go at using them in a less traditional way. I used some Fiskars lever punches and border punches from the seasonal range to make some decorative gift wrap so that my bundles are ready for gift giving.

I bought some white tiles from a hardware store for less than .20c each. I made sure they were clean by washing them in warm, soapy water and drying them thoroughly. Next, I gathered some of the really fun Fiskars stamp sets and a permanent ink, suitable for stamping onto ceramic surfaces. I practiced a few designs on paper before committing to stamping the tiles. When stamping onto the tiles, I was able to get a very neat impression with the ink, though it is very useful to have a few Q-tips to hand to erase any unwanted ink spots or smudges. I used one end wet and the other dry.

After allowing the ink to dry, I sprayed the tiles with an adhesive spray. I experimented with several different finishes, and I found this spray gave a lovely glittery sheen to the tiles. Make sure to use the adhesive spray in a well-ventilated space (preferably outside) and allow to dry thoroughly. (This may take up to several hours to be dry to the touch but it will take a couple of days to be thoroughly dry).


Since it’s always useful to have a few extra gifts on hand, I made two more sets of coasters using paper and fabric.

I found some wonderful handmade paper which I cut to fit neatly on my tiles with my paper trimmer. I then used my Fiskars corner punch to decorate the corners of the papers and adhered them to the tiles with Mod Podge. I gave the tiles about 6 coats of Mod Podge (allowing each coat to dry thoroughly before doing the next) to seal the surface.


I did the same with some fun Christmas fabric.


For my final set of coasters, I couldn’t resist using the Fiskars’ Seasonal punches to decorate the tiles. After 5 coats of Modge Podge, I finished them off with a coat of Modge Podge Glitter to give the surface a bit of Christmas sparkle.


Finally, to complete the tiles, I cut some cork sheets to the correct size with my rotary cutter and glued it to the underside of my tiles with my glue gun.


Supply List

Ceramic tiles
Permanent ink pad (suitable for stamping onto ceramic)
Assorted decorative paper
Assorted fabrics
Spray adhesive
Mod Podge
Glue gun
Cork sheets