School book covers are a multipurpose item; they protect expensive books from wear while making a statement of personal style. Let your personal style shine with these awesome and easy to make duct tape book covers.
Back to School DIY Notebook Covers
By Jen Causey of Something Turquoise
- Ideal for cutting a wide variety of materials including denim, silk and multiple layers of fabric
- Non-stick blade coating makes it easy to cut cleanly through materials with sticky adhesives like tape or glue
- High-grade, precision-ground, stainless-steel blades offer a lasting sharp edge that cuts all the way to the tip
- Ergonomic handle is sculpted to fit your hand, maximizing cutting control and sensitivity
- Bent handle design keeps material flat for mistake-free cutting
- Length: 8"
- Lifetime warranty
- Non-stick Scissors (8")
- Extra-large mat provides ample space for all your fabric-cutting needs
- Self-healing mat provides a cutting surface that lasts longer than others
- Easy-to-read measuring grid on both sides means you can turn the mat over for double the usage
- 30-, 45- and 60-degree bias lines make creating triangle and star shapes easy
- Store flat away from sunlight, heat and cold
- Clean with warm water and mild soap
- Lifetime warranty
- Self Healing Cutting Mat: Large (24" x 36")
Non-stick blades make cutting through adhesive materials a breeze.
Extra-large mat give you plenty of room to work.
Fun Duct Tape (two rolls that match)
1. Using a tape measure or ruler, measure the height and complete length of the book to be covered. Add exactly 6 1/2” to the length and exactly 1/4” to the height. This is how large the book cover needs to be.
2. Using a large cutting mat and non-stick scissors, start to create the “duct tape fabric” by laying down strip after strip, at your desired measurement. Overshoot your measurements a little so you can cut the “fabric” down to fit. Each strip needs to cover at least 1/3” of the prior strip. It’s your choice to do the strips vertically or horizontally. Non-stick scissors are a must for this project as they cut through duct tape quickly and easily.
3. Once you have the first “fabric” side complete, gently peel it up from the first strip and turn over.
4. Now create the backside of the “fabric” by laying more staggered strips of tape across the tape that’s facing up. When finished, fold over the excess tape at the end.
5. Trim any excess "fabric" to reach your determined book cover size, using a ruler and the cutting mat as your guides.
6. Hold the book up to the “fabric” to find where it needs to fold around the book front and back. Fold the “fabric” around the book and crease to mark.
7. Cut pieces of of duck tape in half to make the decorative edge of the book cover. Place the folded book cover on top of the strip and wrap up to secure. Create decorative edges on both the top and bottom.
8. Trim the excess tape from the edges and make a notch at each of the 4 inside corners.
9. Now create the decorative edge for the inside flap of the cover by again cutting a strip in half and adhering to each side.
10. Cut extra little pieces of duct tape to reinforce all corners and edges, as they will see the most wear.
11. Slip your book inside and rest easy knowing your book is well protected!