Handmade Quilted Bag
By Smitha Katti
- 18" x 24" mat is ideal for cutting full widths of fabric from the bolt
- Self-healing mat provides a cutting surface that lasts longer than others
- Easy-to-read measuring grid on both sides means you can turn the mat over for double the usage
- 30-, 45- and 60-degree bias lines make creating triangle and star shapes easy
- Store flat away from sunlight, heat and cold
- Clean with warm water and mild soap
- Lifetime warranty
- Self Healing Cutting Mat: Medium (18" x 24")
- Ideal for cutting fabric strips or squares directly from the bolt
- 30-, 45- and 60-degree line indicators make it easy to cut at perfect angles
- Made of 3 mm-thick acrylic for lasting durability
- Lifetime warranty
- Coastal Colors Acrylic Ruler (6" x 24")
- Ideal for cutting multiple layers of fabric, paper, felt and vinyl
- Rotary blade can be assembled to either side of the rotary cutter, providing optimal blade visibility for both right- and left-handed users
- Precision-ground 45 mm rotary blade features a titanium coating that is three times harder than steel for improved durability and lasting sharpness
- Softgrip® handle offers added comfort and reduced hand fatigue
- Curved, loop-handle design provides a natural fit for your hand, improves control and lets you keep the cutter in hand while you rearrange materials
- Sliding button extends blade during use, locks it into position and retracts it for safe storage
- Blades snap in or out easily for quick replacement
- Replacement 45 mm rotary blades available (non-titanium)
- Five-pack of replacement 45 mm rotary blades available (non-titanium)
- Lifetime warranty
- Titanium Softgrip® Comfort Loop Rotary Cutter (45 mm)
- Ideal for cutting a zigzag pattern along a fabric edge to limit the length of frayed threads, preventing unraveling and keeping projects crisp and clean
- Extended lower blade helps lift fabric for precise cuts
- High-grade, precision-ground, stainless-steel blades offer a lasting sharp edge that cuts all the way to the tip
- Ergonomic handle is sculpted to fit your hand, maximizing cutting control and sensitivity
- Softgrip® handle adds comfort and helps reduce hand fatigue
- Larger handle loops fit hands of all sizes
- Bent handle design keeps material flat for mistake-free cutting
- Length: 8"
- Lifetime warranty
- Softgrip® Pinking Shears (8")
Long-lasting mat is ideal for cutting full widths of fabric.
Easy-to-read ruler makes it easy to cut fabric right from the bolt.
All the benefits of our Comfort Loop design with an improved blade and handle.
Out of Stock
Keep your projects from unraveling at the seams with Pinking Shears designed to reduce hand fatigue.
2 pieces measuring 18" x 12" each
2 handles 40" x 4" each
1 pocket 5" x 7" plus for seam allowance
Try your hand at making a custom bag for yourself and picking the fabric will be so much fun.
1. To begin this bag together, you will need two rectangle pieces of fabric, measuring 18 by 12 inches (seam allowances included) each. These rectangles will make the front and the back exterior of the bag.
2. You will also need two long strips of fabric to form the handles. To make these, you cut two fabric pieces to measure 40 by 4 inches each. Fold the strip in half width wise, iron flat. Fold each end towards the center and iron again to form 1 inch wide handles. Sew along the open edge. You will need two such handles.
3. You will also need one rectangle to form the pocket measuring 5 by 7 inches (plus seam allowances). Finish the inside of the pocket with a contrasting fabric, and added a pretty border on top here.
Tip: The front and back of the purse have an exterior fabric (seen here) that are layered over a thick layer of batting. You need to quilt the fabric and batting (with no backing fabric) in a diamond pattern. This fabric has a printer pattern that easily guided my diamonds, but you could choose any other quilting pattern you want. After quilting, (the quilting process will probably take the most time out of this project!) trim the front and back pieces to measure 18 by 12 inches using a
45mm Rotary cutter and an acrylic ruler.
Adding the Pocket
1. Pin the pocket onto the center of the bag and pin the front handle to sit on top of it. Place the handles 5.25 inches in from each of the outer edges. Sew the handle and pocket in place. Similarly sew the handle in place on the back of the bag.
2. Cut two rectangles from a contrasting fabric, to measure 18 by 12 inches wide. This is to make the inner bag lining.
Putting in the Zipper
Use an all purpose 20 inch zipper to match the exterior fabric.
1. To attach the zipper in place, first place the front of the bag, right side up.
2. Place the zipper right side down along. Now place the lining fabric, right side down, and pin all the three layers together.
3. Using the zipper foot of your sewing machine, sew all the layers together carefully.
4. Open out the layers after sewing the zip, and press the seams out gently. The bag should look something like this at this point…
5. To sew the other side of the zipper in place, place the fabric like a sandwich. The back of the bag, front side up, goes down first.
6. Layer the front of the bag, right side down, on top of that. This should automatically place the front lining fabric right side up on top.
7. Place the back lining piece right side down, and pin all of the layers together. Sew zip in place carefully.
8. Open the bag out, so that the lining pieces are on one side of the zip and the quilted front and back are on the other side. Take a minute here, to pin your handles securely, so that you don’t accidently get them stitched into the bag seams.
9. Press the zipper with the right side up towards the outer fabrics.
Now we are ready to stitch the seams all around.
1. Make sure you move your zipper to the center of the bag before stitching the seams.
2. Sew all around the outer fabrics, with an 1 inch seam along the sides and an 0.5 inch seams along the bottom edge, sew over the zipper, and then sew the side and bottom seams of the lining fabric, leaving a little area open, to turn the bag inside out.
3. Using your
Softgrip Pinking Shears, trim the outside edges of the seams to prevent fraying.
Carefully turn the bag inside out, making sure to push the corners out. Hand-stitch the lining hole closed. Open the zip, and unpin the handles out. Your bag is now ready to use! Drop your wallet in, and some lip gloss and you should be all set!