When kids take their lunch everyday to school, it doesn’t take long before their lunch box is dirty and in need of a good cleaning.
Insulated Fabric Lunch Bag
By Tammy Tutterow
- Extra-large mat provides ample space for all your fabric-cutting needs
- Self-healing mat provides a cutting surface that lasts longer than others
- Easy-to-read measuring grid on both sides means you can turn the mat over for double the usage
- 30-, 45- and 60-degree bias lines make creating triangle and star shapes easy
- Store flat away from sunlight, heat and cold
- Clean with warm water and mild soap
- Lifetime warranty
- Self Healing Cutting Mat: Large (24" x 36")
- Highlighted seam allowance makes it easy to cut fabric strips up to 3.5" wide
- Broken grid lines and easy-to-read measurements make measuring quick and accurate
- Triangle and star patterns simplify shape cutting
- Optional non-slip vinyl feet can be added or removed without damaging the ruler
- Lifetime warranty
- Fashion Acrylic Ruler (3.5" x 18.5")
- Ideal for cutting thicker materials including batting, foams and multiple layers of fabrics
- Rotary blade can be assembled to either side of the rotary cutter, providing optimal blade visibility for both right- and left-handed users
- Precision-ground 60 mm rotary blade features a titanium coating that is three times harder than steel for improved durability and lasting sharpness
- Softgrip® handle offers added comfort and reduced hand fatigue
- Curved, loop-handle design provides a natural fit for your hand, improves control and lets you keep the cutter in hand while you rearrange materials
- Sliding button extends blade during use, locks it into position and retracts it for safe storage
- Blades snap in or out easily for quick replacement
- Replacement 60 mm rotary blades available (item# 01-005896, titanium)
- Five-pack of replacement 60 mm rotary blades available (item# 01-004013J, non-titanium)
- Lifetime warranty
- Titanium Softgrip® Comfort Loop Rotary Cutter (60 mm)
- Ideal for cutting a wide variety of materials including denim, silk and multiple layers of fabric
- Awarded the Arthritis Foundation® Ease-of-Use Commendation for a design that is easy-to-use for people with arthritis or limited hand strength
- Spring-action design gently opens blades after each cut to reduce hand strain
- High-grade, precision-ground, stainless-steel blades offer a lasting sharp edge that cuts all the way to the tip
- Titanium blade coating is three times harder than steel and resists wear, scratches and corrosion
- Ergonomic handle is sculpted to fit your hand, maximizing cutting control and sensitivity
- Softgrip® handle adds comfort
- Bent handle design keeps material flat for mistake-free cutting
- Length: approximately 10"
- Lifetime warranty
- Titanium Easy Action™ Scissors (No. 8)
Extra-large mat give you plenty of room to work.
Look for this at your local retailer
Highlighted seam allowance makes cutting fabric strips easier than ever!
All the benefits of our Comfort Loop design with an improved blade and handle.
These award-winning scissors combine an easy-to-use design with titanium-enhanced blades.
1/2 yard of fabric (outer bag)
1/2 yard of fabric (inside fabric)
1/2 yard of fusible fleece or batting (creates structure and provides insulation. I used Therm O Web’s HeatnBond Fusable Fleece)
1/2 -1 yard of vinyl coating (optional, may cover inside and outside fabrics for a wipe clean finish)
22” of 2.75m wide double fold bias tape (quilt binding)
This year start off the year with an easy to clean alternative to the commercially types, one that could be easily cleaned by simply throwing the bag into the laundry.
1. Create a pattern for your bag using paper or scrap interfacing. Using the pattern from printed grid interfacing (Therm O Web HeatnBond Non-Woven Quilter’s 2” Grid Interfacing). The texture of the adhesive creates a “grip” which helps hold the pattern piece in place while working.
2. The pattern should be 15” tall by 12” wide. Cut two 2” squares from the bottom left and bottom right corners on the 12” side.
3. Cut two pieces of the outer fabric, two pieces of the inside fabric, and two pieces of batting.
4. To save time, stack all of the fabrics together and cut them at the same time. Using a rotary cutter and clear grid ruler makes it easy to cut through stacked fabrics along the edge of the pattern.
5. Stack the cut pieces in the following order: liner fabric (right side facing up); batting, both outside fabrics (right sides facing each other), batting, and liner fabric (right side facing down).
6. If you plan to apply clear vinyl to any pieces with iron on vinyl coating, apply the vinyl to the correct sides of your fabrics before stacking them. Optional: A fun idea to help include your children in the project would be to allow them to decorate a piece of fabric with laundry safe stamps and markers. Apply the clear vinyl to the decorated fabric to seal it.
7. Pin the stacked pieces together.
8. Sew the assembled stack of pieces together with a 1/2” seam allowance along the two long sides and the one short side (the bottom).
9. Turn the bag so that the side (long) seams line up with the bottom seam. This will bring the two notched corners on each side together so that they create a straight line. Pin the sides together and sew 1/2” from the edge.
10. Turn the bag right side out. The outside fabric should now be the outer layer on the front and back of the bag. Pin the top edges of the layers together around the top of the bag. Zigzag stitch around the top of the bag near the edge.
11. Fold the bag so that you create a crease from the bottom corner to the top of the bag about 2” above and 2” below the center side seam. Press the fold. (Skip this step for bags coated in vinyl.)
Optional: To help keep the crease and add shape and structure to the bag, sew along the edge of each of the side folds (skip this step for bags coated in vinyl).
12. Repeat the folding, pressing, and sewing on the bottom of the bag (skip this step for bags coated in vinyl).
13. Place wide bias tape around the opening covering the basting stitch. Sew the bias tape in place.
14. Place one half of a 2” piece of Velcro on each side of the bag on the inside just below the bias tape. Stitch the Velcro in place to secure it.
15. Place one half of a 2” piece of Velcro on the outside front of the bag about 2" from the top of the bag. Place the second half of the piece of Velcro on the front outside of the bag about 4" from the top edge. Stitch both pieces in place.