Have you decided to tackle the seemingly daunting challenge of your first quilt? Would you be surprised if I told you it’s actually not all that hard to learn how to make a quilt for beginners?
How to Make a Quilt
By Emma Jeffery
- Ideal for cutting multiple layers of fabric, paper, felt and vinyl
- High-grade, precision-ground, premium steel 45 mm rotary blade stays sharper longer than other rotary blades
- A symmetrical design makes freehand cutting easy for right- and left-handed users
- Sliding button extends blade guard when not in use
- Blades snap in or out easily for quick replacement
- Lifetime warranty
- Classic Stick Rotary Cutter (45 mm)
- Extra-large mat provides ample space for all your fabric-cutting needs
- Self-healing mat provides a cutting surface that lasts longer than others
- Easy-to-read measuring grid on both sides means you can turn the mat over for double the usage
- 30-, 45- and 60-degree bias lines make creating triangle and star shapes easy
- Store flat away from sunlight, heat and cold
- Clean with warm water and mild soap
- Lifetime warranty
- Self Healing Cutting Mat: Large (24" x 36")
- All-in-one, 3-piece Ruler Connector Set allows you to easily extend your cutting length, right out of the package
- Ruler connector bridges and holds together two rulers for accurate, longer cuts
- Retractable alignment guide on ruler connector helps line up rulers and folds up, to allow for cutting on all sides; tension handle ensures a tight grip
- Clear, 6.5" x 6.5" & 6.5" x 24.5" acrylic rulers let you see where you’re cutting and include highlighted seam allowances
- Full lifetime warranty
- Ruler Connector Set
- Highlighted seam allowance makes it easy to cut fabric strips up to 6" wide directly from the bolt
- Broken grid lines and easy-to-read measurements make measuring quick and accurate
- 30-, 45- and 60-degree line indicators make it easy to cut at perfect angles
- Optional non-slip vinyl feet can be added or removed without damaging the ruler
- Made of 3 mm-thick acrylic for lasting durability
- Lifetime warranty
- Acrylic Ruler (6" x 24")
- Ideal for long, clean cuts through fabrics like silk, oil cloth, light leather, polyester, cotton, crepe, felt and much more
- RazorEdge™ Shears feature ultra-sharp, premium-grade stainless-steel blades with a precisely honed edge that glides through fabric for clean cuts all the way to the tip
- Advanced pivot design delivers our smoothest cutting action ever
- Larger handle loops provide extra room and a comfortable fit for larger hands
- Exceptional comfort and control provided by thumb and finger loops with ergonomic sculpting to fit the shape and natural movement of the hand
- Protective sheath keeps the blades safe and protected
- Length: 9"
- Lifetime warranty
- RazorEdge™ Fabric Shears (9")
- Ideal for precisely cutting fabric, thread, ribbon, floss, yarn and more
- Razor-sharp, premium-grade stainless steel blades make clean cuts
- Built-in blade guard can be extended when not in use for safe storage and travel
- Pointed tips offer control when trimming in tight spaces
- Spring-action design makes cutting easy
- Softgrip® touchpoints improve comfort and control
- Length: 5"
- Full lifetime warranty
- Ultrasharp Thread Snips (5")
Out of Stock
Designed for precise cuts on quilting projects.
Extra-large mat give you plenty of room to work.
Perfectly sized for cutting fabric from the bolt.
Designed for clean, crisp cuts through fabric, these premium fabric shears feature a larger handle and longer, ultra-sharp blades ideal for cutting long swathes.
Quickly and precisely snip fabric and thread with a compact design featuring razor-sharp blades and a built-in blade guard.
2 or 3 contrast fabrics
fabric for binding
heavy duty thread for quilting
quilt adhesive or safety pins
heat erase marking pen
regular thread for handsewing
When I started quilting, I had a great teacher (thanks, Mom!) and I can assure you that a good quilting mentor makes all the difference. Ever since that very first quilt, I’ve been slightly obsessed - not to mention totally in love - with the process. So I promise you, with a few of my tips and tricks in your pocket, you’ll be well on your way to creating beautiful, heirloom-quality quilts that will be passed down for generations. And the best part is, learning how to quilt is easy with my step-by-step guide!
• Steps to Making a Quilt (by machine)
• Steps to Making a Quilt (by hand)
• Pros and Cons: Hand Quilting vs Machine Quilting
• Types of Quilts
• Best Fabrics for Quilting
• Common Questions About Quilting
Steps to Making a Quilt (by machine)
I find quilting to be both relaxing and so rewarding. Follow these simple steps below or watch the video to learn how to make a quilt using a standard sewing machine.
1. Cut the main fabric. After gathering your supplies, place your main fabric on the
Fiskars® Self-Healing 24" x 36" Cutting Mat and cut to 62" x 29" using the
Fiskars® 45mm Classic Stick Rotary Cutter and the
Fiskars® Ruler Connector Set to help you make longer cuts. If you are not comfortable using a rotary cutter, you can use the
Fiskars® RazorEdge™ Table Top Shears that minimize fabric lift from the table, helping keep cuts straight.
2. Cut contrast fabric. Cut five strips of contrast fabrics measuring the following:
• 1 piece 34" x 20"
• 1 piece 34" x 8"
• 1 piece 34" x 16"
• 1 piece 34" x 10"
• 1 piece 34" x 8"
3. Sew the contrast fabric. Using your sewing machine, sew the contrast fabric strips together with ¼" seam allowance.
4. Iron your fabric. Place the sewn fabric strips on the ironing board with the wrong side of the fabric facing you. Press each of the seams towards the darker fabric.
5. Pin and sew the main fabric. Pin the contrast fabric strips to the main fabric and sew.
6. Trim the batting. Use the
Fiskars® RazorEdge™ Easy Action™ Fabric Shears for Tabletop Cutting to cut thick batting at least 2" larger than the quilt top. These shears help keep materials flat on your surface for straight cuts.
7. Sew the quilt backing. Use the rotary cutter, rulers and ruler connector to cut two lengths of backing fabric to 62" in length. Sew the two pieces together to give you a backing that is big enough for the entire quilt.
8. Cut the backing to size. With the seam in the center, trim the backing fabric at least 2" larger than the quilt top using either your rotary cutter or scissors.
9. Assemble the quilt. Pin the quilt top, batting and backing fabric together, or use quilt adhesive to secure all layers.
10. Quilt. Quilt as desired. I measured and marked three lines 1" apart every 4" using a heat erase marking pen, as a guide for quilting. The pen lines are erased with the iron.
11. Cut binding strips. Use the rotary cutter and acrylic ruler to cut seven 2½" wide strips.
12. Sew the binding strips. Sew the strips together. Check that they are long enough to go around the entire perimeter of the quilt. Place two strips together with the right sides facing each other. The strips should be perpendicular to each other. Sew across the diagonal. Trim the excess by ¼".
13. Press the binding strips. Using your iron, press the entire length of binding in half.
14. Sew the binding to the quilt. Place the binding against the edge of the quilt. The raw edge of the binding should align with the raw edge of the quilt. Sew the binding to the right side of the quilt, a ¼“ away from the edge. Leave a 3" tail at the beginning.
15. Sew around the corners. When you come to a corner, sew in a straight line until you are about ¼“ away from the end. Pivot the quilt so that you finish stitching at a 45 degree angle to your seam. Remove the quilt from the machine and fold over the binding. Begin sewing again from the top of the new edge.
16. Join the binding ends. Fold the end of one binding tail to create a neat, folded edge. Place the second tail inside the folded end. Join the ends by sewing them together.
17. Finish the quilt. Use the Fiskars® RazorEdge™ Easy Action™ Fabric Shears for Tabletop Cutting to again trim the batting to ½" and then switch to your
Fiskars® Original Orange-handled Scissors™ or stick with your rotary cutter to trim the top to ½". Fold the binding and sew by hand to the wrong side of the quilt.
Steps to Making a Quilt (by hand)
Learning how to make a simple quilt by hand is truly a lot easier than you may think. And once you have the basic quilting instructions down, it’s just a matter of repeating the process. So if you’re looking for quilting for beginners-type directions, this is for you!
1. Decide on your quilt pattern. If this is your first quilt, go for a simple pattern for a small quilt. Limit your color pallet to a few colors or patterns, and use a basic block pattern. Full squares or triangles made from half squares are good options for first-time quilters. Do you have a baby shower coming up? Baby quilts are smaller, so they’re great for first projects. Keep in mind, you can also do a very basic “pattern“ that doesn‘t require an actual pattern at all! With quilting, creativity is the name of the game!
2. Collect your materials and tools. You don’t need a lot of tools to quilt, but having everything you need on hand before you start is always a good idea. Be sure you read your pattern entirely so you know how much and what kind of fabric to purchase. You’ll also need backing fabric, thread, binding fabric and batting. If you don’t have any sewing supplies, you should consider getting the tools listed below:
• Rotary cutter, either 45mm or 60mm
• Regular, good, sharp scissors, like the Original Orange-handled Scissors from Fiskars
• Cutting mat, 24" x 36" is best for large quilting projects
• Clear acrylic ruler
• Straight pins
• Safety pins
• Seam ripper
• To make it even easier, you can start with the Fiskars® Beginner Quilting Set which contains many of the above listed tools.
3. Prewash your fabric. This is sort of an “optional” step - but it’s one I live by. Prewashing your fabric does two things: rinses any extra dye out of the fabric and shrinks it. Both of these things can ruin your quilt when you wash it for the first time. Higher quality fabrics generally don’t have this issue, but better to be safe than sorry.
4. Iron your fabric. Before you cut your fabric, removing wrinkles will make the process much easier. Use your iron’s steam setting if it has one.
5. Measure and cut your patchwork. After deciding how big you want your quilt to be, you can work backwards, determining the size of each square - remember to factor in a seam allowance. A good rule of thumb is to add ¼" per side. So, if you are making a quilt with 3" x 3" squares, you actually want to cut each square to 3½" x 3½". If you’re using a pattern, the dimensions will be detailed for you. Once you’ve measured, you can cut each piece out to the determined size. You must be very accurate with your cuts. Use your clear acrylic ruler and your rotary cutter to cut each piece. Be sure you place the fabric on your cutting mat so you don’t roll into the table or work surface underneath.
6. Lay your quilt out. This is my favorite part! Lay your quilt out according to the finished design you want. Move pieces around, swap prints in different places. Let your creativity take over. This step is best done on the floor, where you can spread out. Once you’re satisfied with the design, pick up your patches in rows, being careful to keep them in order. Working left to right, simply pick up and place each piece on top of the last from the previous row.
7. Sew your patchwork into rows. You want to take care to sew a perfectly straight seam so you don’t end up with a puckered finish product or with unmatched seams as you work your way down the quilt. Sew several individual rows together. Remember - be careful to use a straight stitch and to be precise in your ¼" seam.
8. Iron your rows. After you have all your long rows sewn together, you need to press the seams so they’ll lay flat. Flip your quilt upside down, so the unfinished side is up. Iron each seam flat, alternating directions. The first row, iron the underside of the seam flat to the right side, the second row, iron flat to the left side and so on.
9. Sew the quilt all together. Once your rows are all together, it’s time to sew each row to the next, again taking care to use a consistent, exact ¼" seam. Take row 1 and row 2, turn them both inward so the finished sides are facing one another. Sew, using a straight stitch just like you did when making the rows. Repeat until all your rows are aligned and sewn together.
10. Iron your whole quilt. This time, you’ll iron the front side of your quilt. Use the same technique and process you did with the rows, alternating the direction you iron the underside seams flat.
11. Make your quilt sandwich and baste your quilt. You’re now at the basting step. Basting will temporarily hold your quilt “sandwich” together - a quilt sandwich refers to all the layers of your quilt…the front, the batting (or stuffing) and the backing.
Layer your quilt in the correct order:
1. Backing - right side down. You want to cut your backing at least 5" wider on all
sides than the actual size of your quilt.
2. Batting - the stuffing, or middle of the quilt. Make your batting a few inches wider than
your top layer.
3. Front - right side up.
Line up your quilt perfectly, working out any wrinkles and smoothing from the center out toward all directions. You can either use pins or basting adhesive spray. Note:
• If you use spray, you want to spray each layer before adding the next when you’re making your sandwich.
• If you pin, you’d simply use safety pins starting in the center, and moving out in all directions. You could also opt to use both techniques (spraying and then pinning), if you want to be extra careful.
12. Stitching. Decide how you want to stitch your quilt together before you start. You can be super fancy, or you can stick to a simple, straight lined, rowed pattern.
13. Time to bind! Binding gives a quilt that finished look you want, with a soft border all the way around the patchwork. There are several ways to bind your quilt, and ultimately the method you choose will just come down to personal preference.
But my favorite way to bind is this:
• First, I square-off the quilt. You do this by sewing all along the perimeter of all four sides of your quilt. I usually make the seam about 1/8" in. I then trim the edge all the way around.
• To make your binding, cut strips of the fabric you’ll use to bind your quilt. The width of the fabric you cut depends on how wide you want the bind to be. I usually do about a 2½" width, but yours will depend on how large your quilt is.
• Cut the length long enough to run the entire length of each side. You want four strips, one for each side of your quilt.
• Pin your binding in place. Use a lot of safety pins for this step - you want the binding very secure so you don’t have any puckers or uneven edges once you sew.
• Lay your binding face-to-face (pattern sides together) and sew from the back side with about a ½" seam. Go all the way around, folding the binding out at the end. You’ll have a finished seam and a pretty edge.
• Finish the corners by sewing a diagonal stitch from corner to corner.
• Trim the outer triangle at the seam.
• Repeat these steps until all the sides are sewn together, and then unfold to create one long continuous binding strip.
• Fold the strip in half, ironing to crease along the center.
• Using straight pins, pin your binding all around the top side of the quilt with the rough side out, and the folded side toward the middle of your quilt. Be sure to leave a tail (about 8") hanging off your quilt, unpinned.
• As you get near each corner, fold the ends together into an upward triangle. Insert a pin through and on either side of the upwards triangle. Once you’ve gone all the way around your quilt, you will “join" the strips. Fold the left side strip down and trim as you see here.
• Lay the right side binding strip inside the folded strip as shown. Pin to secure.
• Stitch around the edge of your binding - you want your seam about ¼" from the rough edge.
• Fold the binding over to the backside of your quilt, pin in place and use a small, sharp needle to hand-stitch the binding to the back.
Pros and Cons: Machine Quilting vs Hand Quilting
There’s no right or wrong answer in terms of “which is better" when it comes to hand quilting vs. machine quilting. For quilt making, the way you go about it really just comes down to a matter of choice.
Machine Quilting Overview
Benefits of Machine Quilting
• Can do straight lines or diagonal lines on a grid
Drawbacks of Machine Quilting
• May not be perceived as “as special“ (most likely only in your own eyes)
• Some quilters experience neck and back pain from the repetitive, short pushing and pulling motion of sewing such a big project on a machine
• Can be expensive to purchase if you don’t already have a machine
Hand Quilting Overview
Benefits of Quilting by Hand
• Heirloom quality
• Fun, for those who love the craft of quilting
Drawbacks of Quilting by Hand
Types of Quilts
• Pieced. More commonly known as patchwork quilts, the pieced is one of the most common of quilt styles - it’s made up of patches of material pieced together.
• Appliquéd quilts. Appliqué is a technique where you sew shapes onto a background to create a beautiful design.
• Paper piecing. This technique is quite popular these days. It’s created by stitching your fabric design onto a patterned, oftentimes numbered paper foundation. Think of it like paint by numbers…only quilting.
• English paper piecing. Similar to regular paper piecing, English paper piecing is a traditional quilting style that uses shapes with many sides, like hexagons. Similar shapes are cut out of paper, and the fabric is folded and basted around them. Each individual shape is then whip stitched together by hand.
Best Fabrics for Quilting
• Home décor weight cotton. This heavy cotton is great for home quilters. It has a pretty sateen finish and doesn’t drape due to its heavier weight. Keep in mind that because it’s so heavy, you can use a light batting with this quilting material.
• Quilter’s weight cotton. Widely considered one of the, if not the, best cotton fabrics to quilt with. Its high quality and it will shrink less than cheaper cotton versions.
• Essex linen. This natural linen-cotton blend is by Robert Kaufmann and is loved by quilters all over, especially when combined with weighted styles of fabric.
• Voile. A bit transparent, voile is a lightweight cotton that can almost be described as silky. It’s a popular option for backing your quilt.
• Quilter’s linen. Another fabric by Robert Kaufmann, quilter’s linen is actually made from cotton but has the look and feel of linen.
Common Questions About Quilting
What is a Quilting Stitch?
Most quilters use a simple running stitch when quilting by hand. Insert the needle through the front of the fabric, catch a little bit of the back and then reinsert through all the layers.
How Do You Make a Quilt Sandwich?
You make a quilt sandwich by placing all the layers together, including: the backing, the batting and the top of your quilt. Keep in mind that the bottom layer should be right side down, and the top should be right side up.
What is Batting for Quilts?
Batting is the cottony, thick material that goes in the center of your quilt. It’s what gives the quilt a “poofiness” once you stich your pattern.
What is a Quilter's Knot?
A quilter’s knot is a very small knot that can go through one layer of fabric so you can hide the tail in between the fabric.
How Long Should a Quilting Stitch Be?
How long your quilting stitch should be really depends on if you’re machine sewing or sewing your quilt by hand. If you’re using a machine, set your stitch length to about 2½" - 3". If you’re stitching by hand, you want about 8-12 stitches per inch.
What Are Quilting Blocks?
Quilting blocks are any units you sew together. To create your quilt, you assemble all your quilt blocks together to form a pattern or design.
Quilting vs Sewing: What's the Difference?
Quilting is actually a type of sewing. It’s the process of stitching together two or more layers of fabric.