Deluxe Crafting Bypass Paper Trimmer (12")

Item #: 197300-1001

Trim heavy-duty crafting materials quickly, safely and comfortably.

Only our Deluxe Craft Bypass Paper Trimmer offers heavy-duty functionality with a low-maintenance design that’s easy to operate. A heavy-duty bypass blade makes crisp cuts through up to 10 sheets of paper at once, and the self-sharpening design makes this trimmer a low-maintenance alternative to other trimmers on the market that need their blades replaced frequently. A built-in paper stop makes repeat cuts quick and convenient, and an aluminum cutting surface improves scale visibility for superior precision. A safety guard and safety lock provide safe use, and an ergonomic cutting handle offers comfortable operation that other bypass trimmers can’t match.

    • Ideal for trimming a wide range of heavy-duty materials including chip board, cardstock, construction paper and more
    • Heavy-duty, self-sharpening bypass blade never needs replacing
    • Built-in paper stop helps make repetitive cuts quickly
    • Aluminum cutting surface improves scale visibility for accurate measurements
    • 1/16" gridlines provide an additional guide for precise measuring
    • Safety guard help keep fingers away from exposed blade
    • Safety lock secures bypass blade for safe transportation and storage
    • Ergonomic cutting handle makes extended use comfortable
    • Built-in carry handle provides portability
    • Cuts multiple sheets of paper at once
    • 12" cut length
    • Lifetime warranty

    How to Assemble the Ergonomic Handle

    1. Remove all components from the carton and make sure all listed parts are present — contact Fiskars Customer Service if any parts are missing
    2. Make sure the orange safety lock is locked to the cutting arm before starting any assembly
    3. Without releasing the orange safety lock, slightly raise the arm and partially slide the provided trimmer handle onto the arm
    4. Grasping the board with your left hand to steady the base, push the handle all the way onto the arm until there is no gap between the front of the handle and the arm
    5. Insert the provided 1 1/8" Phillips head screw through the hole on the right side of the handle and tighten until snug
    6. Be careful not to over tighten the screw

    How to Install the Safety Guard

    1. Install the safety guard by sliding the tab on the narrow end of the guard into the slot near the Fiskars logo on the base
    2. Bring the guard down onto the metal bar until the screw hole leg rests on the base over the screw hole
    3. Insert the provided 1/2" Phillips head screw through the screw leg hole and into the base
    4. Tighten the screw, but be careful not to over tighten
    5. Peel off the protective film on the aluminum plates on the base of the trimmer

    How to Use the Paper Guide

    1. Insert paper guide into guide channel with flat side of paper stop toward the cutting blade and the orange locking arm on the paper guide in an upright position
    2. Once paper guide is fully inserted, push locking arm down to lock into place.  The paper guide can be repositioned anywhere within guide channel by lifting locking arm and repeating the above steps Provided Parts
  • What does "Lifetime Warranty" mean?

Be the first to write a review.
Showing of